Thread-body Oil Cylinder Single Swing Cylinder
Quick Details Brand Name:YOUZHI Model Number:HSP Place of Origin:Taiwan Cylinder body material：Carbon steel Diameter of piston rod:φ10-φ16 Packaging & Delivery Packaging Details：Standard package for hydraulic cylinder Delivery Time：15 days for hydraulic cylinder Product Description Type A:...
Type A: At initial stage,the supporting end is knocked out at the highest top of the cylinder with the help of internal spring.During the work,when the work pieces lie down against the supporting end,the supporting end lowers down simultaneously .When the work piece is placed stably on the jig,it stops moving and then the supporting end stops lowering down,when the supporting cylinder is charged with oil,it will be locked and it will provide supporting force for the work piece firmly.
knocking-out with a spring ,the spring is used to control a clamping force when the knocking-out rod (piston rod) extends to a highest knocking-out position and clamps the workpiece.
Type B:At initial stage,the supporting end is at the top of the cylinder,When the work piece is placed,charge the supporting cylinder with oil ,the supporting end moves up until it meets the work piece,and then it stops moving,continuing charging will lock the supporting end and supporting cylinder,and the supporting end provides supporting corce for the work piece firmly.
knocking-out with oil pressure,it is operated by means of oil pressure and is knocked out when being filled with oil and clamp the workpiece.
Place of Origin:Taiwan
Cylinder body material：Carbon steel
Diameter of piston rod:φ16-φ20
|rang of pressure(KG/cm²）|
|Dia of piston(mm)||Φ16||Φ20|
|Acting type||Single acting |
HSP high pressure support cylinder
HSP Technical drawing
1.The supporting force must match the clamp force of the swing clamp.the supporting force at least is equal to 150% of the clamp force of a swing clamp.
2.Do not exceed the maximum velocity of flow and avoid clamping it too early
3.Install the supporting cylinder in the middle place best.
4.The angle degree between the supporting cylinder and working face could not be larger than 10 while installing.
Push rod nut and Moder
HSP installation instruction
Packaging & Delivery
Packaging Details：Standard package for hydraulic cylinder
Delivery Time：15 days for hydraulic cylinder