Hydraulic Lever Cylinder of Block Line Type
Quick Details Brand Name:YOUZHI Model Number:HLC Place of Origin:Taiwan Cylinder body material：Carbon steel Bore of cylinder:φ25、φ32、φ40、φ50、φ63 Diameter of piston rod:φ18、φ20、φ22.4、φ28、φ35 Max operation pressuer:70kg/cm² The use of Fluid:Clean hydraulic oil Action way:20~50kh/cm² Packaging...
Place of Origin:Taiwan
Cylinder body material：Carbon steel
Bore of cylinder:φ25、φ32、φ40、φ50、φ63
Diameter of piston rod:φ18、φ20、φ22.4、φ28、φ35
Max operation pressuer:70kg/cm²
The use of Fluid:Clean hydraulic oil
Packaging & Delivery
Packaging Details：Standard package for Hydraulic lever cylinder
Delivery Time：15 days for High Hydraulic lever cylinder
HLC Hydraulic block line lever type cylinder
1.The clamp structure of this model is based on the lever principle:it will be tightened as piston pushing out.the clamping force is stronger than the swing clamp cylinder's. The parts are installed outside the cylinder barrel for maintaining easily
2.The cylinder barrel and clamp structure are made of carbon steel . It is firm,durable and long-lived to use
3.The material of the piston is 45#steel,heat treatment ,chrome plated.
4.Please don't exceed 1.5times of the original length,if you need to increase the length of the clamping arm.
E.g.:030LS-352 mean is rotation direction is L-left,clamp arm type is S-single;the stroke is 30mm;bore of cylinder is 55mm.
Oil cylinder two-dimensional figure
The "030-52"is single action,it only one oil hole, rely on spring to relax."030-92"is double action.030-92 have two oil hole, an oil hole a out of the oil hole.
When to use leverage cylinder?
When oil cylinder must be from the top down, rather than rotating down or bypass a bulge obstacle, using leverage cylinder. Press the two die casting or vertical by pressing the lever cylinder can be applied directly. Pay attention to the vertical clearance must be greater than the clearance of fixed artifacts.
Leverage cylinder vertical stroke is?
Vertical travel including artifacts, the size of the biggest changes when the outside of the specifications, can reduce the force created by the jig, and can lead to reduce the life of the jig.