Energy Hydraulic Pump Pack
Intelligent hydraulic station， China Intelligent Hydraulic Station Control System；China servo drive hydraulic station manufacturer;Looking for turnkey hydraulic system engineering Buy small 5HP hydraulic power source, hydraulic pump stationWe are manufacturer, manufacturer of CNC power
Ningbo Youzhi Machinery Technology Co., the current company mainly has R & D department, production department, sales department, e-commerce department, foreign trade department, financial department and human administration department and other 7 functional departments; The energy-saving hydraulic station is under the increasingly common automated production line, and the switching of multiple control and combination modes improves the production flexibility. The energy-saving hydraulic station has better energy-saving effect than the conventional one, and can save 40%-80% energy compared to the conventional volume-controlled hydraulic system, and can realize the energy recovery of the braking energy. In 2015, the company became a member of the Ningbo Energy Conservation Association.
energy hydraulic pump pack
Three-phase four-wire system AC220V、With ground、50-60Hz
Fuel tank capacity
Average operating current
Average power consumption
Average oil temperature
The intelligent hydraulic station can choose two control methods, button output and relay passive output, according to the control mode of the machine tool itself. It can choose whether to use the energy-saving valve group; whether to select whether to perform hydraulic pressure and pressure monitoring of each valve group, or to shield each Detection signal.The intelligent hydraulic station has better energy-saving effect. Compared with the traditional hydraulic system, it can save energy by 40%~80%. It can realize energy recovery of braking energy; the inverter can have PID control and vector control without speed feedback, so it has Better control characteristics; remote fault diagnosis technology is used to detect faults in advance, analyze faults, and locate faults. Inform technicians to promptly resolve or even initiate auto-recovery function to eliminate faults; multi-objective optimization technology, real-time online correction of technical parameters of hydraulic stations, to achieve Energy-saving optimization control of hydraulic station.
Normal Hydraulic system
MY NX 5400/50
Energy saving Hydraulic system
MY NX 5400/50
The significance of energy-saving hydraulic station: Through the sensor, real-time monitoring of the pressure value in the plunger pump, when the control valve is closed, the plunger pump pressure is greater than the controller set pressure, the controller sends a command, the motor runs at low speed, reaching Power saving purpose.
Ordinary hydraulic stations have throttle loss due to some load ratio or throttle valve. In addition, because there is a swash plate to change the size of the plunger volume, thus changing the output flow rate of the pump, so No overflow loss,The hydraulic control device refers to the valve components and their associated bodies that make up the hydraulic system. The hydraulic system consists mainly of the following components: Energy devices Devices that convert mechanical energy into fluid pressure energy. The most common are hydraulic pumps or air compressors. Actuators are devices that convert fluid pressure energy into mechanical energy. Hydraulic cylinders for movement, hydraulic motors for rotary motion, etc.
Address: No.158, Changxin Road, C District, investment Pioneer Park, Jiangbei District, Ningbo, China
TEL:+86-574-81877760 Mobile: +86-13958213988