Energy Hydraulic System
Intelligent hydraulic station， High quality, high quality hydraulic power unit；Hydraulic power source supplier;Looking for turnkey hydraulic system engineering Purchase bottom noise, small, hydraulic power units.Our factory specializes in the production of hydraulic stations, energy-saving hydraulic pump stations
Ningbo Youzhi Machinery Technology Co., the current company mainly has R & D department, production department, sales department, e-commerce department, foreign trade department, financial department and human administration department and other 7 functional departments; The energy-saving hydraulic station is under the increasingly common automated production line, and the switching of multiple control and combination modes improves the production flexibility. The energy-saving hydraulic station has better energy-saving effect than the conventional one, and can save 40%-80% energy compared to the conventional volume-controlled hydraulic system, and can realize the energy recovery of the braking energy. The company obtained a number of "Utility Model Patent Certificates" in 2015
energy hydraulic system
Three-phase four-wire system AC220V、With ground、50-60Hz
Fuel tank capacity
Average operating current
Average power consumption
Average oil temperature
The intelligent hydraulic station can choose two control methods, button output and relay passive output, according to the control mode of the machine tool itself. It can choose whether to use the energy-saving valve group; whether to select whether to perform hydraulic pressure and pressure monitoring of each valve group, or to shield each Detection signal.The intelligent hydraulic station has better energy-saving effect. Compared with the traditional hydraulic system, it can save energy by 40%~80%. It can realize energy recovery of braking energy; the inverter can have PID control and vector control without speed feedback, so it has Better control characteristics; remote fault diagnosis technology is used to detect faults in advance, analyze faults, and locate faults. Inform technicians to promptly resolve or even initiate auto-recovery function to eliminate faults; multi-objective optimization technology, real-time online correction of technical parameters of hydraulic stations, to achieve Energy-saving optimization control of hydraulic station.
Normal Hydraulic system
MY NX 5400/50
Energy saving Hydraulic system
MY NX 5400/50
The significance of energy-saving hydraulic station: Through the sensor, real-time monitoring of the pressure value in the plunger pump, when the control valve is closed, the plunger pump pressure is greater than the controller set pressure, the controller sends a command, the motor runs at low speed, reaching Power saving purpose.
The variable displacement pump of ordinary hydraulic station has throttling loss in the flow control state, so the speed control loop of the open-loop variable pump is the volume throttling speed control loop. The external motor always drives the pump to rotate at the rated speed, and the mechanical loss has been maximum.The hydraulic system is mainly composed of the following components: a device that controls and adjusts the pressure, flow, and direction of flow of the fluid in the hydraulic system diagram. Such as overflow valves, throttle valves, reversing valves, etc.; auxiliary devices to eliminate other than the above three devices, such as fuel tanks, filters, water filters, oil mist, accumulators, etc., which guarantee hydraulic pressure The system works reliably and stably; the fluid that drives the energy of the medium, hydraulic oil or compressed air.
Address: No.158, Changxin Road, C District, investment Pioneer Park, Jiangbei District, Ningbo, China
TEL:+86-574-81877760 Mobile: +86-13958213988