Small Hydraulic System

Small Hydraulic System

Electric hydraulic pump station, High quality, high quality hydraulic power unit;Hydraulic power source supplier;Find a small hydraulic power unit, hydraulic system manufacturer Purchase bottom noise, small, hydraulic power units.Our factory specializes in the production of hydraulic stations, energy-saving hydraulic pump stations

Product Details

Company Profile

Ningbo Youzhi Machinery Technology Co.,is a high-tech enterprise specializing in innovative environmental protection and energy-saving equipment, product development, manufacturing, product sales and service. In order to better meet the customized needs of customers, the first generation of energy-saving hydraulic stations and energy-saving hydraulic control systems were introduced to achieve extensive interconnection between control and monitoring. Energy-saving hydraulic station It eliminates the variable pump with complex variable mechanism compared to the traditional hydraulic station, and uses frequency converter + AC motor + quantitative pump to broaden the speed range and reduce noise;  The company obtained a number of "Utility Model Patent Certificates" in 2015 


18.jpg 


Product parameters

Project

Data

Item

small hydraulic pump station 

Model

SHSV-50E37-22B22-F3

Motor Power

3.7Kw

Power Specifications

AC220V、50-60Hz

Pump flow

22cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

50L

Average operating current

<0.95A/phase

Average power consumption

<0.25kw/h

Average oil temperature

<Room temperature+(5-10)℃

 

Features

Existing hydraulic station systems are powered by ordinary asynchronous motors as ration pumps or variable pumps.

When the load is fixed, in the hydraulic system of the quantitative pump, because the output flow is a certain value, but at the same time there are speed and pressure requirements, so a part of the flow needs to flow back from the overflow valve to the fuel tank.

Pump time is full power output, which is what we often say overflow loss.

Energy-saving hydraulic station Product introduction: The variable frequency hydraulic station adopting remote fault diagnosis and on-site distributed control technology is a new type of global energy-saving transmission mode. Compared with the traditional hydraulic station, it has the advantage of eliminating complicated variable mechanisms. The variable pump, and the use of frequency converter + AC motor + quantitative pump form, widen the speed range, reduce noise.

 

The advantages of energy-saving hydraulic station

Avoid waste of resources through servo technology control



photobank (6).jpg

Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50


The intelligent hydraulic station can distinguish the sequence of at least four groups of elastic movements; it can distinguish two machine tools that individually control a group of hydraulic valves, a group of pneumatic valves and a set of gas detection devices; according to the fixture situation, two modes can be selected. Hydraulic pressure can be selected by itself, all corresponding to the gas detection device.

The innovation of the energy-saving hydraulic station: It achieves about 75% power saving compared with an equivalent hydraulic station; self-regulating energy-saving pressure flow control design research and development; small and lightweight structural design, compared with the equivalent power station Use 30% of oil removal to save two-thirds of the oil and save more than 60% of space.


15.jpg 


The hydraulic system is mainly composed of the following components: a device that controls and adjusts the pressure, flow, and direction of flow of the fluid in the hydraulic system diagram. Such as overflow valves, throttle valves, reversing valves, etc.; auxiliary devices to eliminate other than the above three devices, such as fuel tanks, filters, water filters, oil mist, accumulators, etc., which guarantee hydraulic pressure The system works reliably and stably; the fluid that drives the energy of the medium, hydraulic oil or compressed air.

The intelligent hydraulic station can distinguish the sequence of at least four groups of elastic movements; it can distinguish two machine tools that individually control a group of hydraulic valves, a group of pneumatic valves and a set of gas detection devices; according to the fixture situation, two modes can be selected. Hydraulic pressure can be selected by itself, all corresponding to the gas detection device.



Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

 

contact us

Address: No.158, Changxin Road, C District, investment Pioneer Park, Jiangbei District, Ningbo, China

TEL:+86-574-81877760   

Mobile: +86-13958213988

Hot Tags: small hydraulic systemChina, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry