Energy Hydraulic Unit Station

Energy Hydraulic Unit Station

Intelligent hydraulic station, Machine tool, machining center power source, power plant;70bar Hydraulic Pump Station Manufacturers & Suppliers in China;Looking for turnkey hydraulic system engineering Buy energy-saving and environmental protection hydraulic power equipmentWe are the R&D, production and sales factory of China's energy saving and environmental protection hydraulic pump station.

Product Details

Product Description

Ningbo Youzhi Machinery Technology Co.,the current company mainly has R & D department, production department, sales department, e-commerce department, foreign trade department, financial department and human administration department and other 7 functional departments; The energy-saving hydraulic station is under the increasingly common automated production line, and the switching of multiple control and combination modes improves the production flexibility. The energy-saving hydraulic station has better energy-saving effect than the conventional one, and can save 40%-80% energy compared to the conventional volume-controlled hydraulic system, and can realize the energy recovery of the braking energy.  In 2016, the company was elected as “Executive Director of the Ningbo Energy Conservation Association” 

20.jpg

innovation of the energy-saving hydraulic station

The significance of energy-saving hydraulic station: Through the sensor, real-time monitoring of the pressure value in the plunger pump, when the control valve is closed, the plunger pump pressure is greater than the controller set pressure, the controller sends a command, the motor runs at low speed, reaching Power saving purpose.The intelligent hydraulic station can choose two control methods, button output and relay passive output, according to the control mode of the machine tool itself. It can choose whether to use the energy-saving valve group; whether to select whether to perform hydraulic pressure and pressure monitoring of each valve group, or to shield each Detection signal.

 

photobank (7).jpg 

Main Features for hydraulic power unit

The intelligent hydraulic station has better energy-saving effect. Compared with the traditional hydraulic system, it can save energy by 40%~80%. It can realize energy recovery of braking energy; the inverter can have PID control and vector control without speed feedback, so it has Better control characteristics; remote fault diagnosis technology is used to detect faults in advance, analyze faults, and locate faults. Inform technicians to promptly resolve or even initiate auto-recovery function to eliminate faults; multi-objective optimization technology, real-time online correction of technical parameters of hydraulic stations, to achieve Energy-saving optimization control of hydraulic station.

 

Project

Data

Item

small hydraulic power pack

Model

SHSV-10E15-08B22-F2

Motor Power

1.2Kw

Electric

Three-phase four-wire system AC380V、With ground、50-60Hz

Pump flow

8cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

10L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

photobank (10).jpg 

Many machine control system PLC programs are fixed, even if it needs to be modified, but also need related professionals to operate, and need to consider whether the input and output points enough to use, modify it very troublesome, intelligent hydraulic station to a certain extent This problem.


Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.

photobank (8).jpg 

Tubularization of the hydraulic element is optimized for the connection design. The tubular connection is the earliest connection method used in the hydraulic system. It connects the components together with a pipe to form the required system. This managed connection can only be used for simpler systems. The connection design of the energy-saving hydraulic station takes into account the symmetry and aesthetics of the pipeline, the space for pipe assembly and maintenance, throttling and pressure loss at the corners.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

 

contact us

 联系方式.jpg


Hot Tags: energy hydraulic unit China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry