Energy Saving Hydraulic Power Unit

Energy Saving Hydraulic Power Unit

Asynchronous servo regulation, energy saving and environmental protection hydraulic pump station, 7-14Mpa energy-saving hydraulic station and hydraulic system; 140Bar hydraulic power source manufacturer, manufacturer;Find cheap and high quality hydraulic pump station Buy Environmental Engineering Machinery Hydraulic System Our factory supports OEM services and custom services.

Product Details

Product Description

Ningbo Youzhi Machinery Technology Co.,is a company focusing on product research, customization and sales in the field of mechanical automation and energy saving technology. The “Intelligent Hydraulic Station” researched and developed by the company has broken through the advantages that many hydraulic stations in China do not have, and combines hydraulic pressure, pneumatic pressure, gas detection and many other functions in one, one-stop service. Intelligent hydraulic station equipped with Mitsubishi FX3SA series PLC programmable controller and cost-effective touch screen, only receive a clamp signal from the upper computer, can handle the hydraulic clamping operation, pneumatic clamping operation and gas detection operation required by the machine tool.  The company has a group of high-quality, experienced management team, they are all elite in the machinery manufacturing industry, has many years of teamwork and industry experience 

67.jpg

innovation of the energy-saving hydraulic station

The stability of Youzhi intelligent hydraulic station is very good. It uses Taiwan's YEOSHE special servo pump, new patented structure to reduce noise, the bottom speed to 100rpm low speed inertia is good, to meet the stable operation of low speed and high pressure conditions, reliability, durability and Stability has greatly improved. In the intelligent hydraulic station to set the solenoid valve delay action sequence, the principle is very simple, that is, when different valve groups at the same time issued a clamping or relaxation action, to give different valve groups to perform the action delay time, delay time The longer, the slower than the action, so that the valve group has the purpose of mutual action sequence, not only in the clamping process sequence, but also in the release process can be set in sequence.

 photobank (10).jpg

Main Features for hydraulic power unit

The working process of the hydraulic press is generally divided into several stages such as pressing down, pressurizing, maintaining, raising the movable mold, ejecting and discharging the moving mold. The required flow and pressure are different in each stage. For the oil pump motor, the working process is It is in a changing load state.

In the hydraulic system, the oil pump provides a relatively constant flow. Excess hydraulic oil flows back to the tank through the overflow valve. There is a lot of waste. We can supply an appropriate flow for each action according to the actual needs of the production site. Reduce waste as much as possible.

Project

Data

Item

Energy saving hydraulic power unit

Model

SHSV-10E15-16B22-F2

Motor Power

1.5Kw

Electric

Three-phase four-wire system AC220V、With ground、50-60Hz

Pump flow

16cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

10L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

 


At present, hydraulic technology has penetrated into many fields and has been widely applied and developed in civil industries, machine tools, engineering machinery, metallurgical machinery, plastics machinery, agricultural machinery, automobiles, ships, etc., and has been developed to include transmission and control. And a complete automation technology.


Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.

photobank (8).jpg 

With the continuous deepening of the market economy, the supply and demand relations between the hydraulic, pneumatic, and sealed products have undergone major changes. From the perspective of overall capabilities, it is in a trend of oversupply, especially general sub-hydraulics, pneumatics, and seals. Universal supply exceeds demand: High-parameter, high-value-added high-end products with high technical content that the host needs urgently cannot meet market needs and can only rely on imports.

 

Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

photobank (9).jpg 

contact us

 联系方式.jpg


Hot Tags: Energy saving hydraulic power unit China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry