High Pressure Hydraulic Power Unit
Power saving intelligent hydraulic station, 7-14Mpa energy-saving hydraulic station and hydraulic system; 140Bar hydraulic power source manufacturer, manufacturer;Looking for CNC center power system, power source, hydraulic station Buy Environmental Engineering Machinery Hydraulic System Our factory supports OEM services and custom services.
Product Description
Ningbo Youzhi Machinery Technology Co.,the company since its inception and is committed to the improvement of quality and development capabilities, to create more sophisticated products to meet customer needs We have introduced high-quality equipment from Germany, the United States, Japan and Taiwan to provide our products with sophisticated processing guarantees and cutting-edge inspection solutions. The servo-driven energy-saving hydraulic station can reduce the power loss of more than 75% when it holds pressure. The company has a group of high-quality, experienced management team, they are all elite in the machinery manufacturing industry, has many years of teamwork and industry experience
innovation of the energy-saving hydraulic station
The energy-saving hydraulic station motor drives the oil pump to rotate. The pump absorbs oil from the oil pump and then turns the oil. The mechanical energy is converted into hydraulic oil pressure energy. After the hydraulic oil has been adjusted by the hydraulic valve, the direction, pressure, and flow rate are adjusted through the manifold block (or valve block). Transferred to the hydraulic cylinder or motor through an external pipeline, which controls the direction of the hydraulic machine, the strength of the sea and the speed of the speed, and promote all kinds of hydraulic machinery to do work.In the intelligent hydraulic station system, after the hydraulic clamp Y output port and the hydraulic pressure switch are satisfied at the same time on the PLC controller, both the output of the air valve clamp Y and the gas check switch are also satisfied. Only in this way can the relevant feedback signal be output and the machine tool can process normally, otherwise an alarm will occur.
Main Features for hydraulic power unit
Main advantages of energy-saving hydraulic station: Reduce power consumption in pressure keeping and standby mode, stable pressure waveform; save 2/3 oil,Reduce space by more than 60%; protect oil seals, reduce heat transfer deformation; adjust speed with pressure requirements, reduce temperature; pressure monitoring, provide the optimum amount of flow.
Project | Data |
Item | High pressure hydraulic power unit |
Model | SHSV-60E37-22B38-F3 |
Motor Power | 3.7Kw |
Electric | Three-phase four-wire system AC380V、With ground、50-60Hz |
Pump flow | 22cc/rev |
Output pressure | 20-70Kgf/CM2 |
Fuel tank capacity | 60L |
Hydraulic medium | N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature |
Features | Gas inspection, pneumatic, hydraulic, alarm |
Average oil temperature | <Room temperature+(5-10)℃ |
At present, hydraulic technology has penetrated into many fields and has been widely applied and developed in civil industries, machine tools, engineering machinery, metallurgical machinery, plastics machinery, agricultural machinery, automobiles, ships, etc., and has been developed to include transmission and control. And a complete automation technology.
Energy Comparison
Room Temp | Power | Oil Temp | Motor Speed | Test Time | Oil Need | Wording Current | Electricity Consumption | Test Model |
22℃ | HP/KW | ℃ | R/MIN | Day | L | A | KWh/Year | / |
Normal Hydraulic system | 5/3.7 | 38 | 1800(driving) | 365 | 60 | 4.4 | 14500 | MY NX 5400/50 |
Energy saving Hydraulic system | 5/3.7 | 29 | 300(holding) 1800(driving) | 365 | 20 | 1.18 | 3895 | MY NX 5400/50 |
The product used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in Grinder、Miller、 Planer、 Broacher、Shearing machine、Combined machine tool etc.
With the continuous deepening of the market economy, the supply and demand relations between the hydraulic, pneumatic, and sealed products have undergone major changes. From the perspective of overall capabilities, it is in a trend of oversupply, especially general sub-hydraulics, pneumatics, and seals. Universal supply exceeds demand: High-parameter, high-value-added high-end products with high technical content that the host needs urgently cannot meet market needs and can only rely on imports.
Click picture
contact us
Previous: High Pressure Hydraulic Power Pack