High Pressure Hydraulic Pump Station

High Pressure Hydraulic Pump Station

Speed-adjustable energy-saving hydraulic station and hydraulic power source, Alarm device, gas detection, hydraulic integrated system; Hydraulic pump station production plant, manufacturer;Looking for highly sensitive hydraulic control systems, energy-saving hydraulic consoles Buy high quality and competitive price 14mpa electric hydraulic pump station from us. We produce intelligent control energy-saving hydraulic pump station

Product Details

Product Description

Ningbo Youzhi Machinery Technology Co.,the company since its inception and is committed to the improvement of quality and development capabilities, to create more sophisticated products to meet customer needs We have introduced high-quality equipment from Germany, the United States, Japan and Taiwan to provide our products with sophisticated processing guarantees and cutting-edge inspection solutions. The servo-driven energy-saving hydraulic station can reduce the power loss of more than 75% when it holds pressure.  In 2014, the company won the “China Energy Conservation Association” and “China Energy Saving and Emission Reduction Quality Products”

40.jpg

innovation of the energy-saving hydraulic station

The energy-saving hydraulic station motor drives the oil pump to rotate. The pump absorbs oil from the oil pump and then turns the oil. The mechanical energy is converted into hydraulic oil pressure energy. After the hydraulic oil has been adjusted by the hydraulic valve, the direction, pressure, and flow rate are adjusted through the manifold block (or valve block). Transferred to the hydraulic cylinder or motor through an external pipeline, which controls the direction of the hydraulic machine, the strength of the sea and the speed of the speed, and promote all kinds of hydraulic machinery to do work.photobank (7).jpg 

Main Features for hydraulic power unit

In the intelligent hydraulic station system, after the hydraulic clamp Y output port and the hydraulic pressure switch are satisfied at the same time on the PLC controller, both the output of the air valve clamp Y and the gas check switch are also satisfied. Only in this way can the relevant feedback signal be output and the machine tool can process normally, otherwise an alarm will occur.Main advantages of energy-saving hydraulic station: Reduce power consumption in pressure keeping and standby mode, stable pressure waveform; save 2/3 oil,Reduce space by more than 60%; protect oil seals, reduce heat transfer deformation; adjust speed with pressure requirements, reduce temperature; pressure monitoring, provide the optimum amount of flow.


Project

Data

Item

High Pressure Hydraulic Pump Station

Model

SHSV-30E37-36B22-F1

Motor Power

3.7Kw

Electric

Three-phase four-wire system AC220V、With ground、50-60Hz

Pump flow

36cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

30L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

photobank (10).jpg 


If hydraulic technology is to be further developed, it must have its own position and development. Advanced computer technology, mechanical and electronic technology, control technology, communication technology, and software engineering are the directions for the development of hydraulic systems in current and future construction machinery. These technologies are applied to the hydraulic system of construction machinery to realize intelligentization and automation.

Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.

photobank (8).jpg 

photobank (9).jpg 

At present, in many factories, the pneumatic system uses pressure gas to transfer and control power. In the pneumatic system, the compressor is used to compress and provide the required air, and the gas pressure is increased by reducing the volume of the gas. Pressurized gas may remove dirt through the air cleaner, which may damage the tight fitting parts of the gas assembly. The hydraulic system has greatly improved this deficiency.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png



Patents and honors

 详情图.jpg

Our Partner

P.jpg 

contact us

 联系方式.jpg


Hot Tags: High pressure hydraulic pump station China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry