High Pressure Hydraulic Station

High Pressure Hydraulic Station

Speed-adjustable energy-saving hydraulic station and hydraulic power source, Piston pump energy-saving hydraulic station, hydraulic system;Energy-saving 70% intelligent hydraulic station production plant;Looking for highly sensitive hydraulic control systems, energy-saving hydraulic consoles Buy high quality variable frequency control hydraulic station, hydraulic systemWe produce servo energy-saving pump hydraulic station

Product Details

Product Description

Ningbo Youzhi Machinery Technology Co.,the company since its inception and is committed to the improvement of quality and development capabilities, to create more sophisticated products to meet customer needs We have introduced high-quality equipment from Germany, the United States, Japan and Taiwan to provide our products with sophisticated processing guarantees and cutting-edge inspection solutions. The servo-driven energy-saving hydraulic station can reduce the power loss of more than 75% when it holds pressure.  In 2015, the company was awarded “energy-saving project energy-saving review” and the energy-saving effect reached about 70%. 

35.jpg

innovation of the energy-saving hydraulic station

The energy-saving hydraulic station motor drives the oil pump to rotate. The pump absorbs oil from the oil pump and then turns the oil. The mechanical energy is converted into hydraulic oil pressure energy. After the hydraulic oil has been adjusted by the hydraulic valve, the direction, pressure, and flow rate are adjusted through the manifold block (or valve block). Transferred to the hydraulic cylinder or motor through an external pipeline, which controls the direction of the hydraulic machine, the strength of the sea and the speed of the speed, and promote all kinds of hydraulic machinery to do work.In the intelligent hydraulic station system, after the hydraulic clamp Y output port and the hydraulic pressure switch are satisfied at the same time on the PLC controller, both the output of the air valve clamp Y and the gas check switch are also satisfied. Only in this way can the relevant feedback signal be output and the machine tool can process normally, otherwise an alarm will occur.photobank (7).jpg 

Main Features for hydraulic power unit

A In the intelligent hydraulic station system, after the hydraulic clamp Y output port and the hydraulic pressure switch are satisfied at the same time on the PLC controller, both the output of the air valve clamp Y and the gas check switch are also satisfied. Only in this way can the relevant feedback signal be output and the machine tool can process normally, otherwise an alarm will occur.


Project

Data

Item

High pressure hydraulic station

Model

SHSV-30E37-36B22-F2

Motor Power

3.7Kw

Electric

Three-phase four-wire system AC220V、With ground、50-60Hz

Pump flow

36cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

30L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

photobank (10).jpg 


Main advantages of energy-saving hydraulic station: Reduce power consumption in pressure keeping and standby mode, stable pressure waveform; save 2/3 oil,Reduce space by more than 60%; protect oil seals, reduce heat transfer deformation; adjust speed with pressure requirements, reduce temperature; pressure monitoring, provide the optimum amount of flow.

Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.

photobank (8).jpg 

photobank (9).jpg 

The existing hydraulic station system is powered by an ordinary asynchronous motor as a fixed pump or variable pump. Under a certain load, in the hydraulic system of a fixed pump, the output flow is a certain value, but the load has speed and pressure requirements. Therefore, a part of the flow needs to flow back from the overflow valve to the fuel tank. The pump is always full power output. This is what we often say as overflow loss.*Hydraulic station is composed of three parts: hydraulic oil tank, hydraulic pump device and hydraulic control device. The hydraulic tank is equipped with an air filter, an oil filter, a level indicator, and a cleaning hole. Hydraulic pump devices include different types of hydraulic pumps, drive motors, and couplings between them.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png



Patents and honors

 详情图.jpg

Our Partner

P.jpg 

contact us

 联系方式.jpg


Hot Tags: High pressure Hydraulic station China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry