High Pressure Hydraulic System
Speed-adjustable energy-saving hydraulic station and hydraulic power source， High quality, high quality hydraulic power unit；Hydraulic power source supplier；Looking for highly sensitive hydraulic control systems, energy-saving hydraulic consoles Purchase bottom noise, small, hydraulic power units.Our factory specializes in the production of hydraulic stations, energy-saving hydraulic pump stations
Ningbo Youzhi Machinery Technology Co.,the company since its inception and is committed to the improvement of quality and development capabilities, to create more sophisticated products to meet customer needs We have introduced high-quality equipment from Germany, the United States, Japan and Taiwan to provide our products with sophisticated processing guarantees and cutting-edge inspection solutions. The servo-driven energy-saving hydraulic station can reduce the power loss of more than 75% when it holds pressure. The company obtained a number of "Utility Model Patent Certificates" in 2015
innovation of the energy-saving hydraulic station
The energy-saving hydraulic station motor drives the oil pump to rotate. The pump absorbs oil from the oil pump and then turns the oil. The mechanical energy is converted into hydraulic oil pressure energy. After the hydraulic oil has been adjusted by the hydraulic valve, the direction, pressure, and flow rate are adjusted through the manifold block (or valve block). Transferred to the hydraulic cylinder or motor through an external pipeline, which controls the direction of the hydraulic machine, the strength of the sea and the speed of the speed, and promote all kinds of hydraulic machinery to do work. In the intelligent hydraulic station system, after the hydraulic clamp Y output port and the hydraulic pressure switch are satisfied at the same time on the PLC controller, both the output of the air valve clamp Y and the gas check switch are also satisfied. Only in this way can the relevant feedback signal be output and the machine tool can process normally, otherwise an alarm will occur.
Main Features for hydraulic power unit
Main advantages of energy-saving hydraulic station: Reduce power consumption in pressure keeping and standby mode, stable pressure waveform; save 2/3 oil,
Reduce space by more than 60%; protect oil seals, reduce heat transfer deformation; adjust speed with pressure requirements, reduce temperature; pressure monitoring, provide the optimum amount of flow.
High pressure hydraulic system
Three-phase four-wire system AC220V、With ground、50-60Hz
Fuel tank capacity
N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature
Gas inspection, pneumatic, hydraulic, alarm
Average oil temperature
The variable displacement pump of ordinary hydraulic station has throttling loss in the flow control state, so the speed control loop of the open-loop variable pump is the volume throttling speed control loop. The external motor always drives the pump to rotate at the rated speed, and the mechanical loss has been maximum.
Normal Hydraulic system
MY NX 5400/50
Energy saving Hydraulic system
MY NX 5400/50
The product used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in Grinder、Miller、 Planer、 Broacher、Shearing machine、Combined machine tool etc.
The hydraulic system is mainly composed of the following components: a device that controls and adjusts the pressure, flow, and direction of flow of the fluid in the hydraulic system diagram. Such as overflow valves, throttle valves, reversing valves, etc.; auxiliary devices to eliminate other than the above three devices, such as fuel tanks, filters, water filters, oil mist, accumulators, etc., which guarantee hydraulic pressure The system works reliably and stably; the fluid that drives the energy of the medium, hydraulic oil or compressed air.
Patents and honors