Mini Hydraulic Power Pack for Lift
Quick Details Type:3.7kw hydraulic station for CNC machine Model Number:SHSV-20E15-16B11 Brand Name:YOUZHI Place of Origin:Taiwan Advantage:The operation is simple Tank capacity:20L Motor:1.5KW Working pressure:7-35Mpa Application:CNC machine, machine center, Hydraulic fixture, Hydraulic cutter...
Type:3.7kw hydraulic station for CNC machine
Place of Origin:Taiwan
Advantage:The operation is simple
Application:CNC machine, machine center, Hydraulic fixture, Hydraulic cutter
Working oil temperature:Room temperature +6℃
Color:Black or white
Energy-efficient hydraulic power units
1) High speed response capacity(0.1s reaction), European ABB controller+ German Sensor+Taiwan Plunger pump.
2) Easy Installation & operation easily, connect the 220V / 380V power for work directly, which keeps the space clean and save space a lot.
3) One hydraulic power units can connect Two set machines which can save a lot of power.
4) Save oil 65%, make the hydraulic system small volume, convenient transportation for customers.
5) Oil run at low temperature, ensure the fabrication accuracy, raise production efficiency for equipments.
6) We offer customized products- Turnkey Projects.
Commonly used hydraulic station to pump is introduced
1. Plunger pump axial oblique (disc)
Working principle: plunger reciprocating motion within the cylinder body, realize the effective volume of the seal.
Process: drive shaft rotation, plunger linear motion to seal volume change, the oil by the suction and pressure
2. The gear pump (external gear)
When gear according to this direction, the right side of the oil absorption cavity due to mutually meshing tooth gradually release, the working volume increases gradually, the formation of partial vacuum, so the oil tank in the outside world under the action of atmospheric pressure, the suction tubing into the oil absorption cavity, tooth space of the tank is full, and as the gears rotate, took the oil to the left side of the oil cavity pressure. At the side of the pressure oil, due to the tooth mesh into here, sealing and working chamber volume is reduced, the oil was out, from the oil chamber to the pressure piping.
Throw out of gear oil absorption process: gear → V ↑ → p ↓ → oil absorption;
Oil discharge process: tooth left → V ↓ → p ↑ → oil discharge.
3. The vane pump
Structure: the rotor, stator, leaf, oil distribution plate, shell, end cover, etc.
•When the stator and rotor eccentricity
•The stator curve is round
•Low oil distribution disc has two crescent-shaped window
•Low leaf at the bottom of the corresponding oil pressure oil, not force, only by centrifugal force out
Packaging & Delivery
Packaging Details：Wooden pallet for hydraulic power pack
Delivery Time：15 days for hydraulic hydraulic power pack