Machine Tool Hydraulic Power Plant

Machine Tool Hydraulic Power Plant

Compact, power saving, fuel-efficient and energy-saving hydraulic pump station, Flexible operation, multifunctional control, energy-saving hydraulic device;CNC machine power source, hydraulic station manufacturer;Looking for servo control, variable frequency hydraulic pump, hydraulic station manufacturer, manufacturer Buy alarm system hydraulic system, hydraulic power sourceNew generation of energy-saving and environmental protection hydraulic pump station

Product Details

Ningbo Youzhi Machinery Technology Co.,continues to promote mechanical automation and energy saving and environmental protection technology innovation and progress to contribute to the development of the industry in the new century The company's belief is to continuously promote the automation and energy conservation and environmental protection technology innovation and progress to contribute to the development of the industry in the new century Our energy-saving hydraulic station adopts the latest hydraulic servo energy-saving scheme. Under the state of maintaining pressure, we can reduce the power consumption cost and reduce the oil levitation by reducing the rotational speed of the motor, so as to achieve power efficiency of about 75%.  In 2017, the company won the "National Sira Quality Management System Certification" and the "High-tech Enterprise Certificate."

78.jpg

innovation of the energy-saving hydraulic station

Intelligent hydraulic station, hydraulic servo system adjustment ability, pressure closed-loop control mode makes the system pressure is very stable pressure fluctuation is less than ± 0.5bar, improve the product molding quality;The gas valve is an important component to control the cylinder movement. When there is no cylinder on the fixture, it is also an important component of the gas detection device. Assuming that there is only a cylinder on the fixture and there is an airtight detection hole, then the mode option selects the gas mode. At this time, the hydraulic station stops working. When the upper computer issues a clamping signal, the clamping end of the gas valve is electrically output, and the current detection is performed. The pressure on the airtight detection hole, if it does not leak, then the airtight detection switch is passed.

photobank (4).jpg 

Main Features for hydraulic power unit

The energy-saving hydraulic station uses servo-driven control, which can reduce the power loss of more than 75% when it holds pressure. That is, under the condition of holding pressure, by reducing the rotational speed of the motor, the requirement for significant energy saving can be achieved, thereby reducing the cost of electricity consumption and reducing the oil rise.


Project

Data

Item

Machine tool Hydraulic power plant

Model

SHSV-10E15-16A38-F2

Motor Power

1.5Kw

Electric

Three-phase four-wire system AC380V、With ground、50-60Hz

Pump flow

16cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

20L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

1.5kw-hydraulic power units-2.jpg 


It is difficult for ordinary hydraulic stations to guarantee the supply of hydraulic oil with proper pressure and flow rate to meet the production process requirements. At this time, the quantitative pump needs to provide cooling method to reduce the temperature, and the cost increases. The three-phase asynchronous motor and the quantitative pump do more useless work, causing a lot of Energy waste reduces accuracy. The intelligent hydraulic station overcomes these problems to a great extent.

Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

 

Design of energy-saving hydraulic station's oil pump control system. Each main pump can be started individually, or it can be started after the selected motor is selected according to program logic. When a certain motor is working, the electric control cabinet gives the pump. Work instructions. Each pump is steplessly depressurized starting with no load. If all pre-set main pumps are started for approximately 10 seconds, the proportional relief valve applies a control signal to allow the system to establish pressure.案例 (2).jpg 


Patents and honors

 详情图.jpg

Our Partner

P.jpg 

contact us

 联系方式.jpg


Hot Tags: Machine toolHydraulic power plant China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry