Machine Tool Hydraulic Unit

Machine Tool Hydraulic Unit

Energy-saving and environmental protection intelligent hydraulic station, Machine tool, machining center power source, power plant;70bar Hydraulic Pump Station Manufacturers & Suppliers in China;Find a low oil temperature, asynchronous servo motor, energy-saving hydraulic station manufacturing plant Buy energy-saving and environmental protection hydraulic power equipmentWe are the R&D, production and sales factory of China's energy saving and environmental protection hydraulic pump station.

Product Details

Ningbo Youzhi Machinery Technology Co.,continues to promote mechanical automation and energy saving and environmental protection technology innovation and progress to contribute to the development of the industry in the new century The company's belief is to continuously promote the automation and energy conservation and environmental protection technology innovation and progress to contribute to the development of the industry in the new century Our energy-saving hydraulic station adopts the latest hydraulic servo energy-saving scheme. Under the state of maintaining pressure, we can reduce the power consumption cost and reduce the oil levitation by reducing the rotational speed of the motor, so as to achieve power efficiency of about 75%.  In 2016, the company was elected as “Executive Director of the Ningbo Energy Conservation Association”

89.jpg

innovation of the energy-saving hydraulic station

Intelligent hydraulic station, hydraulic servo system adjustment ability, pressure closed-loop control mode makes the system pressure is very stable pressure fluctuation is less than ± 0.5bar, improve the product molding quality; The gas valve is an important component to control the cylinder movement. When there is no cylinder on the fixture, it is also an important component of the gas detection device. Assuming that there is only a cylinder on the fixture and there is an airtight detection hole, then the mode option selects the gas mode. At this time, the hydraulic station stops working. When the upper computer issues a clamping signal, the clamping end of the gas valve is electrically output, and the current detection is performed. The pressure on the airtight detection hole, if it does not leak, then the airtight detection switch is passed.

photobank (4).jpg 

Main Features for hydraulic power unit

The energy-saving hydraulic station uses servo-driven control, which can reduce the power loss of more than 75% when it holds pressure. That is, under the condition of holding pressure, by reducing the rotational speed of the motor, the requirement for significant energy saving can be achieved, thereby reducing the cost of electricity consumption and reducing the oil rise.


Project

Data

Item

Machine tool hydraulic unit

Model

SHSV-10E15-16B38-F1

Motor Power

1.5Kw

Electric

Three-phase four-wire system AC380V、With ground、50-60Hz

Pump flow

16cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

10L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

1.5kw-hydraulic power units-2.jpg 


Many machine control system PLC programs are fixed, even if it needs to be modified, but also need related professionals to operate, and need to consider whether the input and output points enough to use, modify it very troublesome, intelligent hydraulic station to a certain extent This problem.


Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

 

Tubularization of the hydraulic element is optimized for the connection design. The tubular connection is the earliest connection method used in the hydraulic system. It connects the components together with a pipe to form the required system. This managed connection can only be used for simpler systems. The connection design of the energy-saving hydraulic station takes into account the symmetry and aesthetics of the pipeline, the space for pipe assembly and maintenance, throttling and pressure loss at the corners.案例 (2).jpg 


Patents and honors

 详情图.jpg

Our Partner

P.jpg 

contact us

 联系方式.jpg


Hot Tags: Machine toolhydraulic unit China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry