Medium Voltage Hydraulic Unit

Medium Voltage Hydraulic Unit

Compact, power saving, fuel-efficient and energy-saving hydraulic pump station, Machine tool, machining center power source, power plant;70bar Hydraulic Pump Station Manufacturers & Suppliers in China;Looking for servo control, variable frequency hydraulic pump, hydraulic station manufacturer, manufacturer Buy energy-saving and environmental protection hydraulic power equipmentWe are the R&D, production and sales factory of China's energy saving and environmental protection hydraulic pump station.

Product Details

Ningbo Youzhi Machinery Technology Co.,with its highly focused product quality,Innovative technology at home and abroad fits perfectly We combine the world's cutting-edge technologies with domestic prices to produce ultra-high-quality products. In the hold state, by reducing the speed of the motor to achieve a significant energy-saving requirements, thereby reducing the cost of electricity and reducing oil temperature  In 2016, the company was elected as “Executive Director of the Ningbo Energy Conservation Association” 


56.jpg

innovation of the energy-saving hydraulic station

Principle of energy-saving hydraulic station: In the state of maintaining pressure, by reducing the motor speed, thereby reducing the cost of electricity consumption and reducing the oil rise, to achieve the effect of saving 70% of the power; the reaction time to the maximum displacement during packing pressure is about 0.1 seconds The use of German sensors, self-made controllers, and the integration of custom servo technology, high-sensitivity sensing system, can achieve stop or operation switching in 0.1 seconds; through the monitoring of pressure, with the working state of the load when necessary to provide the required Flow; small and lightweight structure, the equivalent power station uses only 30% of the oil storage, saving two-thirds of the oil, and space savings of more than 60%; as long as the connection of 200V/380V wire to action.

photobank (4).jpg 

Main Features for hydraulic power unit

Whether gas detection or hydraulic pressure detection, touch screen can also be set to facilitate machine maintenance. When the release signal is received, the solenoid of the other end of the solenoid valve will be energized and pressure will be applied to the output port B. When the gas-liquid mixing mode is used, the loose end of the valve will open and the output Y point All the time delay relays are added, and the delay parameters are modified on the touch screen. The larger the parameters, the slower the action, so that the controlled cylinders and cylinders will have a sequence when they are relaxed.


Project

Data

Item

Medium voltage hydraulic unit

Model

SHSV-20E15-16A38-F2

Motor Power

1.5Kw

Electric

Three-phase four-wire system AC380V、With ground、50-60Hz

Pump flow

16cc/rev

Output pressure

20-70Kgf/CM2

Fuel tank capacity

20L

Hydraulic medium

N46 or N32 anti-wear hydraulic oil (select according to different ambient temperature

Features

Gas inspection, pneumatic, hydraulic, alarm

Average oil temperature

<Room temperature+(5-10)℃

1.5kw-hydraulic power units-2.jpg 


The use of vane pump in general hydraulic station is prone to failure, the motor power factor is at the end, the oil temperature is high, the noise is loud, and the voltage fluctuation is large; the energy-saving hydraulic station uses a plunger pump with high service life, high efficiency, the highest level of motor IE3 power saving, oil temperature Constant temperature, noise at the end, stable voltage waveform.

Energy Comparison

Room Temp

Power

Oil Temp

Motor Speed

Test Time

Oil Need

Wording Current

Electricity Consumption

Test Model

22℃

HP/KW

R/MIN

Day

L

A

KWh/Year

/

Normal Hydraulic system

5/3.7

38

1800(driving)

365

60

4.4

14500

MY NX 5400/50

Energy saving Hydraulic system

5/3.7

29

300(holding)

1800(driving)

365

20

1.18

3895

MY NX 5400/50

 

The product  used in CNC Ceter and Machine Center especially in Automobile and motorcycle industry. We have many successful cases in GrinderMillerPlanerBroacherShearing machineCombined machine tool etc.


Click picture

A.jpg B.jpg C.jpg D.jpg

AB.jpgABC.jpg

   blob.png         blob.png

 

Many machine control system PLC programs are fixed, even if it needs to be modified, but also need related professionals to operate, and need to consider whether the input and output points enough to use, modify it very troublesome, intelligent hydraulic station to a certain extent This problem.* Tubularization of the hydraulic element is optimized for the connection design. The tubular connection is the earliest connection method used in the hydraulic system. It connects the components together with a pipe to form the required system. This managed connection can only be used for simpler systems. The connection design of the energy-saving hydraulic station takes into account the symmetry and aesthetics of the pipeline, the space for pipe assembly and maintenance, throttling and pressure loss at the corners.案例 (2).jpg 


Patents and honors

 详情图.jpg

Our Partner

P.jpg 

contact us

 联系方式.jpg


Hot Tags: Medium voltagehydraulic unit China, manufacturers, suppliers, factory, customized, OEM, price
Related Products
Inquiry