How The Small Metallurgical Hydraulic Station Works

- Apr 27, 2018 -

The composition of a small metallurgical hydraulic station:

1, the implementation of equipment - hydraulic cylinders and hydraulic motors;

2. Auxiliary devices - fuel tanks, oil pipes, oil filters, pressure gauges, coolers, oil filters, pipe fittings, pipe joints, and various signal converters;

3, power plant - hydraulic pump;

4, the control device - hydraulic control valve (directional valve, flow valve, pressure valve);

5, the working medium - hydraulic oil.

The working principle of small metallurgical hydraulic station:

The motor drives the oil pump to rotate. The pump sucks oil from the oil tank and converts the mechanical energy into the pressure energy of the hydraulic oil. After the hydraulic oil is adjusted in direction, pressure, and flow through the manifold (or valve assembly), it is connected to the hydraulic cylinder or oil motor via an external line to control the direction of the actuator, the magnitude of the force, and the speed of the drive. Various hydraulic machinery work to achieve a variety of prescribed actions.

  • Energy Hydraulic Power Plant
  • Cylinder Corner for Clamp
  • Hydraulic Lever Cylinder of Block Line Type
  • Auxiliary Support Nut for Fixture
  • Pressure Plate for Fixture
  • Adjustable Mandrel for Fixture

Related Products